Kioxia Introduces Industry’s First UFS Ver. 4.0 Embedded Flash Memory Devices for Automotive Applications
Kioxia Corporation, a world leader in memory solutions, today announced sampling[1] of the industry’s first[2] Universal Flash Storage[3] (UFS) Ver. 4.0 embedded flash memory devicesdesigned for automotive applications. These new, higher performing devices deliver fast embedded storage transfer speeds in a small package size and are targeted to a variety of next-generation automotive applications, including telematics, infotainment systems and ADAS[4]. The improved performance[5] of UFS products from Kioxia – including approximately +100% for sequential read speed and approximately +40% for sequential write speed – enables these applications to take advantage of 5G’s connectivity benefits, leading to faster system startup times and a better user experience.
This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20240129622177/en/
Kioxia: Automotive UFS Ver. 4.0 Embedded Flash Memory Device (Photo: Business Wire)
The first to introduce UFS technology[6], Kioxia continues to move the technology forward. Its new UFS Ver. 4.0 devices integrate the company’s innovative BiCS FLASH™ 3D flash memory and a controller in a JEDEC-standard package. UFS 4.0 incorporates MIPI M-PHY 5.0 and UniPro 2.0 and supports theoretical interface speeds of up to 23.2 gigabits per second (Gbp/s) per lane or 46.4 Gbp/s per device. UFS 4.0 is backward compatible with UFS 3.1.
The new Kioxia devices support High Speed Link Startup Sequence (HS-LSS) features, enabling Link Startup (M-PHY and UniPro initialization sequence) between device and host to be performed at a faster HS-G1 Rate A (1248 megabits per second) than that of conventional UFS. This is expected to reduce the time for Link Startup by approximately 70% compared to the conventional method.
Advanced features and functionalities are supported in the new UFS Ver. 4.0 devices to address demanding automotive application requirements, including:
- Refresh Feature: Improves data reliability by refreshing degraded data to prevent data corruption even in the harsh, demanding in-vehicle environment.
- Extended Diagnosis Feature: Enables users to view important information from the UFS device, allowing preventative action to be taken.
Available in capacities of 128, 256 and 512 gigabytes (GB), the new Kioxia devices support a wide temperature range, meet AEC[7]-Q100 Grade2 requirements and offer enhanced reliability capabilities that complex automotive applications require.
Related Link:
UFS & e-MMC for Automotive | KIOXIA - Japan (English)
Notes:
[1] Specification of the samples may differ from commercial products.
[2] As of January 30, 2024. Kioxia survey.
[3] Universal Flash Storage (UFS) is a product category for a class of embedded memory products built to the JEDEC UFS standard specification. Due to its serial interface, UFS supports full duplexing, which enables both concurrent reading and writing between the host processor and UFS device.
[4] Advanced Driving Assistant System
[5] Compared to Kioxia Corporation’s previous generation 512GB device No. “THGJFGT2T85BAB5”
[6] Kioxia Corporation’s first sample shipment, as of February 8, 2013.
https://www.kioxia.com/en-jp/business/news/2013/20130208-1.html
[7] Electrical component qualification requirements defined by the AEC (Automotive Electronics Council).
MB/s is calculated as 1,000,000 bytes/s. Read and write speeds are the best values obtained in a specific test environment at Kioxia and Kioxia warrants neither read nor write speeds in individual devices. Read and write speed may vary depending on device used and file size read or written.
In every mention of a Kioxia product: Product density is identified based on the density of memory chip(s) within the Product, not the amount of memory capacity available for data storage by the end user. Consumer-usable capacity will be less due to overhead data areas, formatting, bad blocks, and other constraints, and may also vary based on the host device and application. For details, please refer to applicable product specifications. The definition of 1KB = 2^10 bytes = 1,024 bytes. The definition of 1Gb = 2^30 bits = 1,073,741,824 bits. The definition of 1GB = 2^30 bytes = 1,073,741,824 bytes. 1Tb = 2^40 bits = 1,099,511,627,776 bits.
Company names, product names and service names may be trademarks of third-party companies.
About Kioxia
Kioxia is a world leader in memory solutions, dedicated to the development, production and sale of flash memory and solid-state drives (SSDs). In April 2017, its predecessor Toshiba Memory was spun off from Toshiba Corporation, the company that invented NAND flash memory in 1987. Kioxia is committed to uplifting the world with “memory” by offering products, services and systems that create choice for customers and memory-based value for society. Kioxia's innovative 3D flash memory technology, BiCS FLASH™, is shaping the future of storage in high-density applications, including advanced smartphones, PCs, SSDs, automotive and data centers.
Customer Inquiries:
Kioxia Group
Global Sales Offices
https://business.kioxia.com/en-jp/buy/global-sales.html
*Information in this document, including product prices and specifications, content of services and contact information, is correct on the date of the announcement but is subject to change without prior notice.
View source version on businesswire.com: https://www.businesswire.com/news/home/20240129622177/en/